CONTEGA SOLIDO IQ
Other application situations
A - Transition between membranes and masonry wall
Guide the vapour check membrane into position. Leave slack for expansion so as to allow for relative motion between components. Remove the release films from CONTEGA SOLIDO IQ. Centre the tape on the transition point and gradually stick it in place. Rub firmly using the pro clima PRESSFIX application tool to secure the adhesive bond.
A - Transition between membranes and masonry wall
Guide the vapour check membrane into position. Leave slack for expansion so as to allow for relative motion between components. Remove the release films from CONTEGA SOLIDO IQ. Centre the tape on the transition point and gradually stick it in place. Rub firmly using the pro clima PRESSFIX application tool to secure the adhesive bond.
B - Rectangular penetrations in masonry / concrete
Remove the narrow release film and stick the tape to the first side of the beam. Remove the wide release film and stick the tape to the wall. Cut into the tape at the beam corners so that the tape can be stuck to the adjacent beam sides. Seal the other sides in an airtight manner analogously. Rub firmly using the pro clima PRESSFIX application tool to secure the adhesive bond.
B - Rectangular penetrations in masonry / concrete
Remove the narrow release film and stick the tape to the first side of the beam. Remove the wide release film and stick the tape to the wall. Cut into the tape at the beam corners so that the tape can be stuck to the adjacent beam sides. Seal the other sides in an airtight manner analogously. Rub firmly using the pro clima PRESSFIX application tool to secure the adhesive bond.