Grommets/gaskets for 1 or 2 cables

1. Pull the cable through and align

1. Pull the cable through and align

Pull the cable through the pre-punched hole in the EPDM, guide the grommet as far as the subsurface and align. Suitable for cables with a diameter of 4.8 - 12 mm (³⁄₁₆″-½″).

Also for exterior use: black backing fleece not visible behind open-jointed cladding.

1. Pull the cable through and align

Pull the cable through the pre-punched hole in the EPDM, guide the grommet as far as the subsurface and align. Suitable for cables with a diameter of 4.8 - 12 mm (³⁄₁₆″-½″).

Also for exterior use: black backing fleece not visible behind open-jointed cladding.

2. Remove the release film

2. Remove the release film

Gradually remove the release film.

2. Remove the release film

Gradually remove the release film.

3. Tape the grommet and rub firmly to secure the adhesive bond

3. Tape the grommet and rub firmly to secure the adhesive bond

Tape the grommet to the subsurface and rub the tape firmly to secure the adhesive bond. Ensure that there is sufficient resistance pressure. This work can be carried out more efficiently and in a manner that is kinder to your hands by using the PRESSFIX application tool.

3. Tape the grommet and rub firmly to secure the adhesive bond

Tape the grommet to the subsurface and rub the tape firmly to secure the adhesive bond. Ensure that there is sufficient resistance pressure. This work can be carried out more efficiently and in a manner that is kinder to your hands by using the PRESSFIX application tool.

Also available for 2 cables

Also available for 2 cables

KAFLEX is also pre-fabricated with two holes in the EPDM for quick and reliable penetrations with two cables of diameters of 4.8 - 12 mm (³⁄₁₆″-½″).

Also available for 2 cables

KAFLEX is also pre-fabricated with two holes in the EPDM for quick and reliable penetrations with two cables of diameters of 4.8 - 12 mm (³⁄₁₆″-½″).